3D Filament BASF Ultrafuse PLA 1,75 mm 2,5kg Black

SNEA d.o.o. je ovlašteni distributer BASF Forward AM materijala
SNEA 3D Print - SNEA Online Trgovina

Ultrafuse PLA
Ultrafuse PLA is Poly-Lactic-Acid, a biodegradable polymer with a low melting point. It is an easy material to print with and Ultrafuse PLA gives a smooth printing result. This most used 3D printing material is available in a wide range of RAL colors and translucent variants.
When properly cooled, PLA has a higher maximum printing speed, lower layer heights, and sharper printed corners. Combining this with low warping of the print makes it a popular plastic for makers, prosumers and schools.
Tips & Tricks

Print Temperature: 210-220 degrees

Heated Bed: 60 degrees

Print Speed: 30-80 mm/s

Material Properties

Tensile Strength (MPa): 21.2 (ZX), 34.7 (XY)

Flexural Modulus (MPa): 1715 (ZX), 1708 (XZ), 1860 (XY)

Elongation at Break: 1.2 % (ZX), 4.2 % (XY)

Impact Strength Izod notched (kJ/m2): 1.6 (ZX), 2.1 (XZ), 3.3 (XY)

Impact Strength Izod unnotched (kJ/m2): 4.7 (ZX), 9.6 (XZ), 11.0 (XY)

HDT @ 0.45 MPa: 65 oC

BASF Quality Control
The best raw materials available is selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches. It will perform as expected every time.
All BASF products are 100% traceable to the source.

www.3dprint.ba