3D Filament BASF Ultrafuse TPU 95A 1,75 mm 750g Black

SNEA d.o.o. je ovlašteni distributer BASF Forward AM materijala
SNEA 3D Print - SNEA Online Trgovina

Ultrafuse Flexibles
By building on the legacy of BASF‘s decades of experience in flexible materials, this material is based on the established thermoplastic polyurethane Elastollan, standing for maximum reliability, consistent product quality and cost efficiency.
TPU 95A
With its outstanding abrasion resistance, Ultrafuse TPU 95A presents an excellent choice for wear and tear applications. Parts printed with this material set themselves apart by high elongation at break, great layer adhesion and a good resistance to oils as well as industrially used chemicals.
Tips & Tricks

Nozzle temperature: 210-230°C

Bed temperature: 40 °C

Build Chamber Temperature: Passively heated, closed chamber

Nozzle diameter: ≥ 0.4 mm

Bed modification: Adheres to different print bed types (glass preferred)

Print speed: 15-40mm/s

Material Properties

Shore A Hardness: 92

Abrasion Resistance: 64 mm3

Compression set at 23°C, 72h: 38%

Stress at Break: 44.2 MPa (XY), 12,2 MPa (ZX)

Elongation at Break: 661 % (XY), 192 % (ZX)

Tear Strength: 90 kN/m (XY), 8 kN/m (XZ), 14 kN/m (ZX)

BASF Quality Control
The best raw materials available is selected from renowned suppliers. Production on state-of-the-art computer-controlled machinery guarantees a truly consistent filament, also between colors and batches. It will perform as expected every time.
All BASF products are 100% traceable to the source.