3D Printer Filament CopyMaster PLA 1,75 mm 1 kg Plava

PLA from Copymaster3D is a high-quality filament that can be used in many applications when it comes to 3d-printing. We also offer Copymaster3D in a wide range of colors so you can be sure of finding your personal favorite. PLA is based on polylactic acid and is fully biodegradable and emits no toxic fumes. This means that you don’t have to worry about using the filament indoors with children or pets nearby. Copymaster3D PLA also has the benefit of very low shrinkage, this means that you will have very accurate prints, but also that the risk of warping is very low. Even though a heated build platform isn´t required we do recommend it as you will get the best adhesion. If you use the heated bed we recommend a temperature between 30-60°C
Filament Typ PLADiameter 1,75 mmTolerance 0,05 mmWeight 1,00 kgLenght 335 mColor white
Printing Parameter Recomended Printing Temp Min 190 ºCRecomended Printing Temp Max 220 ºCRecomended Printbed Temperature Min 0 ºCRecomended Printbed Temperature Max 45 ºCRecomended Printing Speed Min 40 mm/sRecomended Printing Speed Max 150 mm/sRecomended Fan Speed Min 60 %Recomended Fan Speed Max 100 %
General Specific gravity 1,24 g/cm3 ASTM D792
Temperature Heat deflection temp 50 °C
Tensile Tensile strength 45 MPa
Elongation Elongation at yield 5,3 % ASTM D638Elongation at break 13,3 % ASTM D638
Flexural Flexural Strenght 63,64 % ISO 178Flexural Modulus 2157 ISO 178
Other Impact Strength 17 KJ/m2 ISO 179